How to obtain IP address on Akuvox door phone

Modified on Thu, 25 Nov, 2021 at 3:43 PM

Scenario

IP Addresses can be obtained on the Akuvox door phones directly. After obtaining the IP address, you will be able to use it to log in to the device web interface for configuration or troubleshooting, etc. This article briefs on how to obtain the IP address directly on the different models of Akuvox door phones.

Operation Instruction

This article is applicable to X916/X915/R29/R27/R28/R26/R20A/E11/R20K/R20B/E16/E18.

Operation Procedure

Model	Process
X916/X915/R29	On the dial interface, press "9999">" Dial Icon" >"3888" > "OK" to enter the system setting to check the IP address.
R27/R28	Press "*2396#" to enter the administrator screen, then press "1" to enter the system information screen to check the IP Address
R26/R20A/E11/E12	Long press the call button for several seconds until the status LED turns when the device's IP address will be announced automatically.
R20K	Press "*3258*" and then the device's IP address will be announced automatically.
R20B	Long press the first push-button and the device's IP address will be announced automatically.
E16/E18	Long press the device initial screen for about five seconds, enter the default system PIN code " admin", then press "System Info" (E18), "Info " (E16)